User`s guide

Features
30  Digi Connect Family User’s Guide
 Remote Shell (rsh) (not supported in Digi Connect WAN)
 Simple Network Management Protocol (SNMP)
 Telnet
In the default web interface, access to network services is enabled and disabled on the
Network Services page of Network Configuration. For more information, see "Enable or
Disable Network Services" on page 84. In the Command-Line Interface, network services
are enabled and disabled through the set service command. See the Digi Connect Family
Command Reference for the set service command description.
Wireless Networking Features
The following table summarizes key wireless-networking features in the Digi Connect
wireless devices (Digi Connect Wi-ME and Digi Connect Wi-EM). For more details on
support of these features, see the readme file for this release. The following features can
be configured in wireless Digi Connect devices.
Feature Description
Country Code Specifies the country in which the product is used.
Network Mode
-- Infrastructure Mode
-- Ad-Hoc Mode
Channel
Can use automatic channel search-and-select or a user-configurable
channel number.
Data Rate Auto, 1Mbps, 2Mbps, 5.5Mbps, 11Mbps
Service Set
Identifier (SSID)
A user-configurable SSID string or auto-connect option.
Authentication
Options
-- Open
-- Shared
-- Wi-Fi Protected Access (
WPA2/802.11i)
-- WPA/WPA2 with pre-shared key (WPA-PSK)
802.1x
(
WPA2/802.11i)
Authentication
-- Protected Extensible Authentication Protocol (PEAP) with EAP- MS
See "Supported WPA Authentication Methods" on page 40
Encryption
-- Temporal Key Integrity Protocol (TKIP)
--Counter mode CBC MAC Protocol (CCMP)
-- Wired Equivalent Privacy (WEP)
-- Use of encryption can be disabled.