User`s guide

 23
Introduction
 Serial Interface
– Intergrated 2-port Ethernet switch on 8 and 16-port models
– HTTP for easy browser configuration
– Up to 9 Telnet or Rlogin sessions per port
– Password access
– Firmware upgrades via TFTP
– Save/Restore configuration to host
– 230 Kbps throughput on all ports
– Full modem and hardware flow control
 LEDs for serial Ethernet activity
Digi Connect WAN
 Memory: 4MB Flash; 8 MB RAM
 Serial interface:
– Switch-selectable EIA-232 (DB-9M)
– Throughput up to 230,400 bps
– 5, 6, 7, 8 data bits.
– 1, 1.5, 2 stop bits.
– Mark/space/even/odd parity.
– Full signal support for TXD, RXD, RTS, CTS, DTR, DSR, and DCD.
– Hardware and software flow control.
 DHCP Server (enabled by default)
 Power requirements: See "Power Requirements Digi Connect SP Digi Connect
Wi-SP, Digi Connect WAN, and Digi Connect RG" on page 26.
Digi Connect RG
 One EIA-232/422/485 serial port
 10/100 Base-T Ethernet
 GPRS with EDGE network for high speed wireless network connectivity
 1900/850 MHz EDGE/GPRS modem for use in U.S. and other markets