User`s guide

Administration from the Default Web Interface
124  Digi Connect Family User’s Guide
3 While holding the reset button, power up the unit.
4 Hold the button for 20 seconds and then release it.
The default configuration is restored. When the restoration is complete, the device flashes
a code (1-5-1).
Restore the Configuration by Resetting the Digi Connect ME and Digi
Connect Wi-ME
To restore the configuration on a Digi Connect ME or Digi Connect Wi-ME, perform a
hard or soft reset. See the Digi Connect ME Hardware Reference for details on hard and
soft resets.
Restore the Configuration Using the Reset Button on the Digi Connect EM
or Digi Connect Wi-EM
1 Power off the device server.
2 Locate the reset switch between P3 and CR1.
3 Power on the device while holding the reset switch down. (Hold it down for about
20 seconds.)
Restore the Configuration Using the Reset Button on the Digi Connect WAN
or Digi Connect RG
1 Power off the device by unplugging the power supply.