User`s guide

Monitoring Capabilities from Web-Based and Java Applet Interfaces
108  Digi Connect Family User’s Guide
View System Information
The System Information page, organized under Administration on the default web
interface home page, displays information about your Digi Connect device. It is typically
used by technical support to troubleshoot problems. The System Information page
includes:
 General system information
 GPIO pin information, including the current state of GPIO pins
 Serial port information
 Network statistics
General System Information
The General page displays the following information about a Digi Connect device, which
can be useful in device monitoring and troubleshooting.
Model
The model of the Digi Connect device.
MAC Address
A unique network identifier. All network devices are required to have their own unique
MAC address. The MAC address is on a sticker on your Digi Connect device. The number
is displayed as 12 hexadecimal digits, usually starting with 00:40:9D.
Firmware Version
The current firmware version. This information may be used to help locate and download
new firmware.
Firmware updates may be downloaded from http://support.digi.com/support/firmware
.
CPU Utilization
The amount of CPU resources being used by the Digi Connect device.
Up Time
The amount of time the Digi Connect device has been running since it was last powered
on or rebooted.
Total/Used/Free Memory
The amount of memory (RAM) available, currently in use, and currently not being used.