User`s guide

 101
Configuring the Digi Connect Devices
Configuration Pages
In the menu on the left side of the screen, the choices under Configuration display pages
for configuring various features, including:
 Network: For configuring network communications. See "Configure Network
Settings" on page 102.
 Serial Ports: For configuring serial ports. See "Configure Serial Ports" on page
103.
 GPIO: For configuring the GPIO pins. See "Configure GPIO Pins" on page
103.
 Security: For configuring security features. See "Configure Security Features"
on page 104.
 In addition, to configure alarms, you use the Alarms link under Management.
See "Configure Alarms" on page 103
Some of the configuration pages organize the configuration settings into tabs. For
example, the Serial Ports Configuration screen has tabs for Basic, Port Services, Network
Services, and Advanced settings.
Saving, Canceling, and Refreshing Configuration Settings
The configuration screens in the Java applet interface contain several buttons: Save,
Cancel, and Refresh.
 Save: Saves the values you have entered or changed to the Digi Connect
device.
 Cancel: Only changes that have been made prior to clicking Save are reset to
the initial values when you first arrived on that particular page. For example,
Cancel would be useful in the following sequence:
1 Suppose you click on the Network choice, and on the Network page,
DHCP is currently selected.
2 Instead, you select to manually assign a static IP.
3 Next, you enter an IP address and Subnet Mask.
4 Then, you realize that you do not want to use those settings, and click
Cancel.