User guide

Chapter 8 Reference 41
such facilities.
Telephone wiring must be at least 6 feet from bare power wiring or lightning
rods and associated wires, and at least 6 inches from other wire (antenna
wires, doorbell wires, wires from transformers to neon signs), steam or hot
water pipes, and heating ducts.
Before working with existing inside wiring, check all electrical outlets for a
square telephone dial light transformer and unplug it from the electrical
outlet. Failure to unplug all telephone transformers can cause electrical
shock.
Do not place a jack where it would allow a person to use the telephone
while in a bathtub, shower, swimming pool, or similar hazardous location.
Protectors and grounding wire placed by the service provider must not be
connected to, removed, or modified by the customer.
.
Digi Contact Information
Digi International
11001 Bren Road East
Minnetonka, MN 55343
U.S.A.
Do not touch uninsulated telephone wiring if lightning is
likely!
External Wiring
Any external communications wiring you may install needs
to be constructed to all relevant electrical codes. In the
United States this is the National Electrical Code Article
800. Contact a licensed electrician for details.
Important!
Customer Service and Support
World Wide Web: http://support.digi.com
email [e-mail]
Telephone (U.S.) [phone]
Telephone (other locations) [phone]