User guide

30 Chapter 6 Administration
Resetting the Configuration Using the Reset Button
1. Power off the device server by unplugging the power.
2. Use a non-conducive, small diameter tool (such as wood or plastic) with
a blunt end (NOT SHARP or the button could be damaged) to press
gently and hold down the reset button. The flashing sequece of LEDs
may take several seconds. The following figures help you locate the
reset button. The first shows a Digi One IA. The second a Digi One SP.
3. While holding the reset button, power up the unit.
4. Hold the button for 20 seconds and then release it.
The default configuration is restored.
Backup/Restore the Configuration
This procedure shows you how to backup or restore the configuration to a
server and to download a configuration from a server to a file or TFTP.
Prerequisite
If you intend to use TFTP, ensure that the TFTP program is running on a
server before you begin this procedure.