Installation guide

set permissions
96 Chapter 2 Command Descriptions
s-rtstoggle={none|r-self|read|rw-self|w-self-r|rw}
Specifies permissions for the “set rtstoggle” command.
none
The command cannot be executed.
r-self
The user can execute the "display" portion of the command if the user
is logged in on the specified line.
read
The user can execute the "display" portion of the command for any
line.
rw-self
The user can execute the "display" and "set" portions of the command
if the user is logged in on the specified line.
w-self-r
The user can execute the "set" portion of the command if the user is
logged in on the specified line. The user can execute the "display"
portion of the command for any line.
rw
The user can execute the "display" and "set" portions of the command
for any line.
s-serial={none|r-self|read|rw-self|w-self-r|rw}
Specifies permissions for the “set serial” command.
none
The command cannot be executed.
r-self
The user can execute the "display" portion of the command if the user
is logged in on the specified line.
read
The user can execute the "display" portion of the command for any
line.
rw-self
The user can execute the "display" and "set" portions of the command
if the user is logged in on the specified line.
w-self-r
The user can execute the "set" portion of the command if the user is
logged in on the specified line. The user can execute the "display"
portion of the command for any line.
rw
The user can execute the "display" and "set" portions of the command
for any line.