Installation guide

set permissions
Chapter 2 Command Descriptions 95
s-profile={none|r-self|read|rw-self|w-self-r|rw}
Specifies permissions for the “set profile” command.
none
The command cannot be executed.
r-self
The user can execute the "display" portion of the command if the user
is logged in on the specified line.
read
The user can execute the "display" portion of the command for any
line.
rw-self
The user can execute the "display" and "set" portions of the command
if the user is logged in on the specified line.
w-self-r
The user can execute the "set" portion of the command if the user is
logged in on the specified line. The user can execute the "display"
portion of the command for any line.
rw
The user can execute the "display" and "set" portions of the command
for any line.
s-rciserial={none|read|rw}
Specifies permissions for the “set rciserial” command.
none
The command cannot be executed.
read
The user can execute the "display" portion of the command.
rw
The user can execute the "display" and "set" portions of the command.
s-router={none|read|rw}
Specifies permissions for the “set forwarding” and “set nat” commands.
none
The command cannot be executed.
read
The user can execute the "display" portion of the command.
rw
The user can execute the "display" and "set" portions of the command.