Installation guide

set permissions
92 Chapter 2 Command Descriptions
s-gpio={none|read|rw}
Specifies permissions for the “set gpio” command.
none
The command cannot be executed.
read
The user can execute the "display" portion of the command.
rw
The user can execute the "display" and "set" portions of the command.
s-group={none|read|rw}
Specifies permissions for the “set group” command.
none
The command cannot be executed.
read
The user can execute the "display" portion of the command.
rw
The user can execute the "display" and "set" portions of the command.
s-host={none|read|rw}
Specifies permissions for the “set host” command.
none
The command cannot be executed.
read
The user can execute the "display" portion of the command.
rw
The user can execute the "display" and "set" portions of the command.
s-menu={none|read|rw}
Specifies permissions for the “set menu” command.
none
The command cannot be executed.
read
The user can execute the "display" portion of the command.
rw
The user can execute the "display" and "set" portions of the command.
s-mgmtconnection={none|read|rw}
Specifies permissions for the “set mgmtconnection” command.
none
The command cannot be executed.
read
The user can execute the "display" portion of the command.
rw
The user can execute the "display" and "set" portions of the command.