Installation guide

set permissions
90 Chapter 2 Command Descriptions
revert-all={none|execute}
Specifies permissions for the “revert all” command. Individual “revert”
commands are governed by the permissions for that particular command,
but “revert all” uses a different mechanism that bypasses the individual
commands.
none
The user cannot execute the command.
execute
The user can execute the command.
rlogin={none|execute}
Specifies permissions for the “rlogin” command.
none
The command cannot be executed.
execute
The command can be executed.
s-accesscontrol={none|read|rw}
Specifies permissions for the “set accesscontrol” command.
none
The command cannot be executed.
read
The user can execute the "display" portion of the command.
rw
The user can execute the "display" and "set" portions of the command.
s-alarm={none|read|rw}
Specifies permissions for the “set alarm” command.
none
The command cannot be executed.
read
The user can execute the "display" portion of the command.
rw
The user can execute the "display" and "set" portions of the command.