Installation guide

set permissions
88 Chapter 2 Command Descriptions
Options type={user|group}
Specifies whether the command applies to users or groups. This option
defaults to “user.”
id=range
Specifies the ID or the range of IDs of the users or groups to be acted on.
If omitted, the “name” option must be specified.
name=string
Specifies the name of the user or group to be acted on. If omitted, the “id”
option must be specified.
backup={none|execute}
Specifies permissions for the “backup” command.
none
The command cannot be executed.
execute
The command can be executed.
boot={none|execute}
Specifies permissions for the “boot” command.
none
The command cannot be executed.
execute
The command can be executed.
buffers={none|r-self|read|rw-self|w-self-r|rw}
Specifies permissions for the “display buffers” and “set buffer”
commands.
none
Neither command can be executed.
r-self
The user can execute the "display" portions for both commands if the
user is logged in on the specified line.
read
The user can execute the "display" portions for both commands for
any line.
rw-self
The user can execute the "display" and "set" portions for both
commands if the user is logged in on the specified line.
w-self-r
The user can execute the "display" portions for both commands for
any line and the "set" portions for both commands if the user is logged
in on the specified line.
rw
The user can execute the "display" and "set" portions for both
commands for any line.