Installation guide

set host
68 Chapter 2 Command Descriptions
set host
Device support This command is supported in all Digi Connect Family devices.
Purpose Configures a name for the device, also known as a host name, or displays
the current host name for the device.
Required
permissions
Permissions must be set to “set permissions s-host=read” to display the
current host name, and “set permissions s-host=rw” to display and set the
host name. See "set permissions" on page 86 for details on setting user
permissions for commands.
Syntax Configure a name for the device
set host name=name
Display the current host name
set host
Options name=name
The name for the device. The name can be up to 32 characters long, and
can contain any alphanumeric characters, and can also include the
underscore ( _ ) and hyphen ( -) characters.