Installation guide

set group
66 Chapter 2 Command Descriptions
name= string
Specifies the name of the group to be acted on.
newname=string
Specifies a new group name.
commandline={on|off}
Specifies whether the users in the group are allowed to access the
command line of the device.
on
Users can access the command line interface.
off
Users can not access the command line interface.
The default is “on.”
menu={none|index|name}
Specifies whether the users in the group are allowed to access the
custom menu interface of the device and defines the custom menu that
the users will have displayed.
none
Users are not allowed to access the custom menu interface.
index
Users are allowed to access the custom menu interface and will be
displayed the custom menu at the specified index
name
Users are allowed to access the custom menu interface and will be
displayed the custom menu using the specified name.
The default is “none.”
defaultaccess={none|commandline|menu}
Specifies the default access method and interface that users in the group
will be given upon logging into the device. Note that the specified
interface must be enabled for the group and have a valid menu if
specified.
none
The group has no default access to the device and the users are not
allowed to access either the command line interface or the custom
menu interface without explicitly specifying the access method.
commandline
The users will be displayed and given access to the command line
interface assuming the group has command line access rights
enabled.
menu
The users will be displayed and given access to the custom menu
interface and be displayed the custom menu as specified by the
“menu” option.
The default is “commandline.”