Installation guide

rlogin

42 Chapter 2 Command Descriptions

rlogin

Devices

supported

This command is supported in all Digi Connect devices.

Purpose Performs a login to a remote system, also referred to as an rlogin.

Required

permissions

Permissions must be set to “set permissions rlogin=execute” to use this

command. See "set permissions" on page 86 for details on setting user

permissions for commands.

Syntax rlogin [esc=(char)] [{user=user-name|-l user-name}]

[ip_address]

Options esc

A different escape character than the ~ (tilde) character, which will be

used for the current Rlogin session. This character is used for

suspending a session from the remote host to return to the device server

command line.

user=user-name | -l user-name

The user name to use on the remote system. If you do not specify a

name, your device server user name will be used. The “-l user-name”

option is for compatibility with the UNIX “rlogin” command.

ip_address

The IP address of the system to which you are performing the remote

Examples rlogin 10.0.0.1