Installation guide

info
26 Chapter 2 Command Descriptions
Results Following are descriptions of the statistics displayed for each “info”
command option.
The statistics displayed include data, event, and error counts. These
statistics are useful in understanding how the device is operating and can
be helpful in finding problems. In particular if an error counter is found to be
increasing you may have a problem with the device.
To reset the statistics, reboot the device.
Device statistics
Device
Information
Description
Product The model of the Digi Connect device.
MAC Address A unique network identifier. All network devices are required
to have their own unique MAC address. The MAC address is
on a sticker on your Digi Connect device. The number is
displayed as 12 hexadecimal digits, usually starting with
00:40:9D.
Firmware Version The current firmware version. This information may be used
to help locate and download new firmware. Firmware updates
may be downloaded from the Digi Support website.
Boot Version The current boot version.
Post Version The current POST version.
CPU Utilization The amount of CPU resources being used by the Digi
Connect device.
Uptime The amount of time the Digi Connect device has been running
since it was last powered on or rebooted.
Total Memory The total amount of memory (RAM) available.
Free Memory The amount of memory (RAM) currently not being used.
Used Memory The amount of memory (RAM) currently in use.