Installation guide

About the Commands in this Chapter
Chapter 3 Modem Emulation Commands 155
About the Commands in this Chapter
This chapter describes the Digi-specific modem emulation commands that
have been implemented for Digi Connect devices. It is divided into several
sections:
• The AT command set. These are commands to perform actions in a
modem-emulation connection.
• Modem S-Register definitions.
• A description of the result codes for the commands.
Accepted But Ignored AT Commands
Any other commands not described in this chapter but in the standard AT
command set are accepted but ignored and therefore have no effect. Such
commands are pertinent to actual modems, but not to modem emulation.