Installation guide

set wlan
Chapter 2 Command Descriptions 143
psk=string
Used when the “security” option is set to “wpa_psk.” This option specifies
a string that is converted into a pre-shared key (PSK) that is used for
encryption.
wepmode={64bit|128bit}
Specifies the key size used when WEP encryption is enabled. The default
is 64bit.
wepindex=1-4
Specifies which of the 4 possible keys will be used. The default is 1.
wepkeyN=hex_string
A hexadecimal string that serves as the key if WEP encryption is enabled.
The key consists of 26, 10, or 0 (zero) hexadecimal digit characters. If
“wepmode=64bit”, the wepkey is 10 digits. If “wepmode=128bit”, the
wepkey is 26 digits. A wepkey value of 0 length clears the value.
country=string
The country in which the device will be used. By selecting a country, the
channel settings will be restricted to the legal set for that country.
maxtxrate={1mb|2mb|5.5mb|11mb}
The maximum transmission rate that the device will use.
txpower={16dbm|14dbm|12dbm|10dbm|8dbm|6dbm}
The wireless transmit power.
Example #> set wlan wepkey1=ab12cd34ef567ab12cd34ef567 wepindex=1
#> set wlan wepmode=128bit
#> set wlan ssid="access point 1"