Installation guide

set wlan
142 Chapter 2 Command Descriptions
inner_eap={[gtc],[md5],[mschapv2],[otp],[chap],[mschap],
[ttls_mschapv2],[pap,[any]]}
The types of protocols that are allowed to authenticate the device. These
are used within the encrypted connection established by PEAP or TTLS.
The following are Extensible Access Protocols (EAP) that can be used
with PEAP or TTLS:
gtc
Generic token card.
md5
Message Digest Algorithm (MD5).
mschapv2
Microsoft Challenge response Protocol version 2.
otp
One Time Password.
The following are non-EAP protocols that can be used with TTLS:
chap
Challenge response Protocol.
mschap
Microsoft Challenge response Protocol.
ttls_mschapv2
Microsoft Challenge response Protocol version 2.
pap
Password Authentication Protocol.
any
Sets all inner Extensible Authentication Protocols.
options={[diversity],[short_preamble],[verify_cert]}
diversity
Enable reception on multiple antennas on devices with this capability.
short_preamble
Enable transmission of wireless frames using short preambles, if
allowed by the access point.
verify_cert
Verify that certificates received from an authentication server or
access point are signed by a trusted certificate authority (CA).
Standard CAs are built in, and additional trusted certificates may be
added.
username=string
Used when the “security” option is set to “wpa_auth.” This option
specifies the user name to be used during authentication.
password=string
Used when the “security” option is set to “wpa_auth.” This option
specifies the password to be used during authentication.