Installation guide

set wlan
138 Chapter 2 Command Descriptions
Inner and outer protocols
The following table shows relationships between outer protocols and inner
protocols specified on the “set wlan” command. Outer protocols are the
types of Extensible Authentication Protocols (EAP) that are allowed to
establish the initial connection with an authentication server or access
point. The outer protocols are specified by the “outer_eap” option. Inner
protocols are the types of protocols that are allowed to authenticate the
device. These protocols are used within the encrypted connection
established by PEAP or TTLs. The inner protocols are specified by the
“inner eap” option.
Required
permissions
Permissions must be set to “set permissions s-wlan=read” to display
wireless settings, and “set permissions s-wlan=rw” to display and change
wireless settings. See "set permissions" on page 86 for details on setting
user permissions for commands.
Inner
Protocols:
Outer Protocols:
PEAP TLS TTLS
GTC X
MD5 X X
MSCHAPv2 X X
OTP X X
TLS X X
CHAP X
MSCHAP X
MSCHAPv2 X
PAP X