Installation guide

set system
122 Chapter 2 Command Descriptions
set system
Devices
supported
This command is supported in all Digi Connect Family devices.
Purpose Configures and displays system-identifying information, such as a
description of the device, its location, and a contact person.
Required
permissions
Permissions must be set to “set permissions s-service=read” to display
network service settings, and “set permissions s-services=rw” to display
and change network service settings.
Syntax Change system-identifying information
set system [description=string|location=string|contact=string]
Display system identifying information
set system
Options description=string
A description of this device. The maximum length is 64 characters. The
default is “”.
location=string
The location of this device. The maximum length is 64 characters. The
default is “”.
contact=string
The contact for this device. The maximum length is 64 characters. The
default is “”.
Examples Set description, contact, and location
set system description=”Engineering printer” location=”Room 1347”
contact=”John Doe at x-3749”
See also "revert" on page 39.