Installation guide

set snmp
Chapter 2 Command Descriptions 121
authfailtrap={on|off}
Enables or disables the sending of authentication failure traps.
on
Enables the sending of authentication failure traps.
off
Disables the sending of authentication failure traps.
The default is “off.”
coldstarttrap={on|off}
Enables or disables the sending of cold start traps.
on
Enables the sending of cold start traps.
off
Disables the sending of cold start traps.
The default is “off.”
linkuptrap={on|off}
Enables or disables the sending of link up traps.
on
Enables the sending of link up traps.
off
Disables the sending of link up traps.
The default is “off.”
logintrap={on|off}
Enables or disables the sending of login traps.
on
Enables the sending of login traps.
off
Disables the sending of login traps.
The default is “off.”
Examples Enable authentication failure traps
set snmp trapdestip=10.0.0.1 authfailtrap=on
Specify a new private community string
set snmp privatecommunity=”StLucia72!”
See also • "revert" on page 39.
• To disable and enable SNMP, use the “set service” command. See "set
service" on page 118.
• To disable and enable SNMP alarm traps, see "send" on page 43.