Installation guide

set rciserial

Chapter 2 Command Descriptions 113

set rciserial

Devices

supported

This command is supported in all Digi Connect Family devices.

Purpose Used to:

• Turn on/off RCI serial mode on the first serial port. The RCI serial mode

is a mode that allows a configuration file to be loaded over a serial port

when the DSR input signal is high.

• Display current RCI serial-mode settings.

Required

permissions

To use this command, permissions must be set to one of the following:

• For a user to display the RCI serial settings for any line:

“set permissions s-rciserial=read”

• For a user to display and set the RCI serial settings on any line:

“set permissions s-rciserial=rw”

See "set permissions" on page 86 for details on setting user permissions

for commands.

Syntax Turn on off RCI serial mode

set rciserial [state={on|off}]

Display current RCI serial-mode settings

set rciserial

Options state

Enables (on) or disables (off) RCI serial mode on the port. The default is

“off.”

Example set rciserial state=on