Installation guide

set pppoutbound
106 Chapter 2 Command Descriptions
address_mask=ip_address_mask
The IP mask to apply to the address specified on the “remote address”
and “local address” options. When you specify a specific IP address on
the “remote address” and “local address” options, this option modifies the
meaning of the IP address for routing purposes. The default is
255.255.255.255.
default_gateway={yes|no}
Selects whether to use the PPP interface as the default route. The default
is “no.”
protocol_compression={on|off}
Specifies whether the device server attempts to negotiate protocol
compression on PPP connections.
on
The device server attempts to negotiate protocol compression on PPP
connections.
off
The device server will not negotiate protocol compression.
The default is “on.”
address_compression={on|off}
Specifies whether the device server attempts to negotiate address
compression on PPP connections.
on
The device server attempts to negotiate address compression.
off
The device server does not attempt to negotiate address
compression.
The default is “on.”
header_compression={on|off}
Specifies whether the device server attempts to negotiate IP protocol
header compression on PPP connections. This is commonly referred to
as Van Jacobsen (VJ) header compression.
on
The device server attempts to negotiate IP protocol header
compression.
off
The device server does not attempt to negotiate IP protocol header
compression.
The default is “on.”