Installation guide

set permissions
100 Chapter 2 Command Descriptions
status={none|read|rw}
Specifies permissions for the “status” command.
none
The command cannot be executed.
read
The user can execute the "display" portion of the command.
rw
The user can execute the "display" and "set" portions of the command.
telnet={none|execute}
Specifies permissions for the “telnet,” “mode,” and “send” commands.
none
The commands cannot be executed.
execute
The commands can be executed.
who={none|execute}
Specifies permissions for the “who” command.
none
The command cannot be executed.
execute
The command can be executed.
webui={none|execute}
Specifies permissions for Web user interface access.
none
The user cannot use the Web user interface.
execute
The user can access the Web user interface.
filesys={none|read|rw}
Specifies permissions for file system access.
none
The user cannot access the file system.
read
The user can read the file system.
rw
The user can read and write the file system.