International Network Device User's Guide Digi CM

System and Port Logging
Chapter 5 35
4. Enter the IP address of the primary and secondary (if applicable) syslog
server and select the syslog facility from the drop down menu.
5. Click Save & apply.
Enable A Compact-flash Card
The compact-flash card must be installed and configured on the Digi CM
before it can be used for system logging or storing Digi CM configuration
information. When storing log files to an external flash card, the size of the
available storage is dependent on both the size of the card and the port counts
of the Digi CM used. The maximum settings for log file sizes are listed in the
following table. See also Adding a Compact-flash Card on page 27.
Total Flash
Card Size
Digi CM System Log
Port Log
(per port)
Total Memory
Used
32
8 4.6 3.1M
29M
16 4.6 1.53M
32 4.6 762K
48 4.6 500K
64
8 9.2 6.2M
58M
16 9.2 3.1M
32 9.2 1.53M
48 9.2 1.02M
128
8 18.4 12.3M
118M
16 18.4 6.2M
32 18.4 3.1M
48 18.4 2.0M
256
8 36.8 24.6M
236M
16 36.8 12.3M
32 36.8 6.2M
48 36.8 4.1M