User`s guide

Configuration through the web interface
95
Supported SNMP traps
SNMP traps can be enabled or disabled. Supported traps include:
 Authentication failure
 Login
 Cold start
 Link up
Alarms can be issued in the form of SNMP traps.
A large set of MIBs define these various trap types (unsolicited status message from the device).
All products support MIBs for serial alarms / login traps/RFC 1215.
Products with the geofencing/GPS feature support MIBs for geofencing.
Products with mobile/cellular capability support MIBs for mobile alarms.
In the web interface, traps are enabled/disabled at Configuration > System > SNMP >
Enable Simple Network Management Protocol (SNMP) traps
Alarms are configured at Configuration > Alarms > Alarm Conditions > Alarm n >
Alarm Destinations > Send SNMP trap to following destination when alarm occurs