User`s guide
Configuration through the web interface
93
Simple Network Management Protocol (SNMP)
Simple Network Management Protocol (SNMP) is a protocol that can be used to manage and
monitor network devices. Digi devices can be configured to use SNMP features, or SNMP can be
disabled entirely for security reasons. To configure SNMP settings, click the
Simple Network Management Protocol link at the bottom of the System Configuration page.
Supported standard RFCs and MIBs
Digi devices support these standard SNMP-related Request for Comments (RFCs) and
Management Information Bases (MIBs)
Name Location Description
RFC 1213 http://www.ietf.org/rfc/rfc1213.txt
Management Information Base (MIB) II; a MIB for
managing a TCP/IP network. It is an update of the
original MIB, now called MIB-I. MIB-II contains
variable definitions that describe the most basic
information needed to manage a TCP/IP network.
Variable definitions are organized into several groups,
such as groups for managing the system, network
interfaces, address translation, transmission media, and
various protocols, including IP, ICMP, TCP, UDP, EGP,
and SNMP.
RFC 1215 http://www.ietf.org/rfc/rfc1215.txt
Generic Traps (coldStart, linkUp, authenticationFailure
only)
RFC 1316 http://tools.ietf.org/html/rfc1316
Character MIB
RFC 1317 http://tools.ietf.org/html/rfc1317
RS-232 MIB