User`s guide

Interfaces for configuring, monitoring, and administering Digi devices
26
Configuration interfaces
Several interfaces are available for configuring Digi devices, including:
 The Digi Device Setup Wizard, which helps set up an IP address for the device and
quickly configure features.
 The Digi Device Discovery Utility, which locates Digi devices on a network, and allows
opening the web interface for the devices.
 Device Management, a configuration interface to fine-tune or monitor devices. Device
Management cannot assign an IP address but it can change one.
 A web-based interface embedded with the product, providing device configuration
profiles for quick serial-port configuration and other settings.
 An optional Java applet that can be used for device configuration, and as a sample
application for customization and further application development.
 A command-line interface (CLI).
 Remote Command-line Interface (RCI) protocol
 Simple Network Management Protocol (SNMP).
The Digi Device Setup wizard
The Digi Device Setup Wizard is a wizard for quick initial configuration of Digi devices. It is
available from the Digi Support site and also provided on the Software and Documentation CD
shipped with each product. It assigns an IP address for the device, configures the device’s serial
port parameters based on a selected configuration scenario called a port profile, and determines
whether RealPort software needs to be installed.