User`s guide

System status LEDs
189
LED/button Color and Light
Pattern
Description
Power LED Solid Green Power is applied.
Status LED Green Blinks during product initialization and factory reset, using the light
patterns below.
This LED should never blink during normal operation. If it blinks
constantly, contact Digi Technical Support.
1-1-1 blinking
green
Firmware is initializing.
1-5-1 blinking
green
Device configuration has been restored to its factory defaults.
Other blinking
green
Contact Digi Technical Support.
Solid green Device is powered on and ready for operation.
Reset button N/A Performs equivalent of a power-cycle.
Ethernet Link
LED
Solid green Ethernet link is up. Will light solid green when an active LAN connection
is plugged into the Ethernet port.
Ethernet
Activity LED
Blinking yellow Blinks when active traffic is on the LAN connection.
Serial TX Yellow On when data is being transmitted out of a serial port.
Serial RX Green On when data is being received on a serial port.