User`s guide

System status LEDs
187
LED/button Color and Light
Pattern
Description
Ethernet Uplink
LED
Solid green Ethernet Uplink connection is up but no traffic is on the line.
Blinking green Traffic is on the Ethernet Uplink connection.
Off Ethernet Uplink connection is disconnected.
Ethernet Switch
LEDs
Solid green Ethernet Switch connection is up but there is no activity on the line.
Blinking green Ethernet activity is on the Ethernet Switch connection
Off Ethernet Switch connection is not in use.
Serial LED Solid green Serial connection is up but no traffic is on the line.
Blinking green Serial connection is up and traffic is on the serial port.
Off Serial connection is not in use
Find Me/
Locator LED
Blinking amber Can be used as an aid in finding a specific device among a group of
devices. The LED can be turned on and off from theDigi device’s
command line and web interfaces.
From the command line, issue the findme blink={on|off} command.
From the web interface, go to Administration > Activate Find Me
LED. Once the LED is enabled, the menu item changes to Stop Find Me
LED which can be used to turn off the LED.
Off Find Me LED is deactivated.
Power Green Power is on.
Off Power is off.