User`s guide

Administration from the Java applet interface
159
Administration from the Java applet interface
In the Java applet device interface, administration tasks are also organized under Administration
in the main menu. There are fewer choices than in the web interface:
 Backup/Restore: Backs up or restores a Digi device configuration.
 Restore Factory Defaults: Restores a Digi device’s configuration to factory defaults.
 System Information: Displays system information for the Digi device, including
general device information, current GPIO pin settings, serial line signals and statistics,
and network statistics.
 Reboot: Reboots the Digi device.
File management tasks or firmware updates cannot be performed from the Java applet interface. To
perform such tasks, switch the device interface to the web interface.
Additionally, over time, network services may need to be disabled or enabled. See "Network
services settings" on page 64.
Backup/restore device configurations
1 If using TFTP, ensure that the TFTP program is running on a server.
2 From the main menu, click Administration > Backup/Restore from the main menu.
3 Choose the appropriate option (Backup or Restore) and select the file.