User`s guide

Administration from the web interface
156
Using the Reset button
If the Digi device cannot be accessed from the web interface, the configuration can be restored to
factory defaults by using the Reset button.This kind of reset clears all configuration settings.
1 Power off the Digi device.
2 Locate the Reset button or pin on your device.Here is the reset button for a Digi Connect SP
unit.
For Digi Connect EM or Digi Connect Wi-EM, the Reset button is located between P3
and CR1, as shown:
Digi Connect ME and Digi Connect Wi-ME do not have a reset button. Instead, pin 20
(the /init pin) is shorted to ground.
For Digi Connect ES, the reset switch is on the side panel.
Reset button
1 2 3
MAC
00:00:00:00:00
Reset button