User`s guide

Configuration through the web interface
105
Managing alarms through Device Cloud
All alarms can be sent to Device Cloud for display and management from that interface. See
"Alarms" on page 85.
Users settings
Users settings involve several areas:
 User authentication: whether authentication is required for users accessing the Digi
device, and the information required to access it.Depending on the Digi product,
multiple users and their authentication information can be defined. User authentication
settings are on the Users settings page.
 User access settings: the device interfaces that a user can access, such as the command
line or web interface.
 User permissions settings: the permissions a user has to access and configure the Digi
Connect device.
 Several settings on the Network Configuration pages are available to further secure the
Digi device. For example, unused network services can be disabled on the Network
Services page.
About user models and user permissions
Several user models are implemented in the Digi Connect Family products:
 Two-user model
 More than two-user model
To determine which user model is implemented:
 In the web interface, if the menu includes Users, the Digi Connect device uses either the
two-user model or the more than two users model.
 In the command-line interface, issue a show user or set user command. In the
command output, note how many user IDs are defined: one, two, or more than two. Or,
issue a set user ? command and note the range for the id=range option. If the id=range
is not listed, there is only one user. Otherwise, the range for user IDs is displayed. These
commands are described in the Digi Connect Family Command Reference.