User`s guide

Configuration through the web interface
100
 Retry if the IP address update fails:
Retry after: These options specify whether another IP address update attempt should be
made after a previous attempt failed, and how often the retry attempts should occur.
Timed Device Cloud Connection
 Enable Timed Device Cloud Connection: When enabled, this device will initiate the
connection to the Device Cloud Server at the configured interval (period). A timed
connection defers to (will not disrupt) an Device Cloud connection that is already
established. If a timed connection defers to an existing Device Cloud connection, or if
the timed connection cannot be successfully established, the Digi device server will try
again at the next interval.
 Device Cloud Server Address: The IP address or hostname of the Device Cloud
Server.
 Connect every: H hrs M mins: The interval (period) in hours and minutes at which the
Digi device server will attempt a timed connection to the specified Device Cloud Server.
 After boot, wait before first timed connection: When the Digi device server boots
(start-up), a delay may be observed before the first timed connection is attempted. There
are three choices for this delay:
– Immediate: The first timed connection is attempted immediately.
– One Interval: The first timed connection is attempted after one configured interval
(period) has elapsed.
– Random Delay: The first timed connection is attempted some random interval of time
between zero (immediate) and the configured interval (period). A random delay may be
helpful for such cases as when a number of devices are deployed in a single location,
and it is desired to distribute their first Device Cloud timed connection attempts over
time when power is restored following an outage.