Specifications

4 DC-788 Operation Manual
CLEAR key.
Weighing Mode - Used to clear the Unit Weight. Used to return to the weighing display when
doing accumulation.
Programming Mode - Used to delete an Item Code or associated value when programming item
codes. Used to Cancel input in programming SPC codes. Used to Reset
Sequence Number to zero when programming Sequence Codes.
PCS key - Used for computing unit weight by sampling.
TARE key.
Weighing Mode - Used to set or clear the tare value.
Programming Mode - Used to store SPC changes and escape to the Weighing Mode when
programming specifications.
Maintenance Mode - Used to escape to the Weighing Mode from the Maintenance Mode.
REZERO key.
Weighing Mode - Used to reset the weight display to zero.
Maintenance Mode - Used to enter different parts of the Maintenance Mode when combined with
numeric codes.
CODE/IN-OUT key.
Weighing Mode - Used to recall Item Codes from memory and to determine inventory IN/OUT
status.
- (Minus) key.
Weighing Mode - Used to delete a character entered during operations. Used to subtract a
quantity during accumulation. Also prompts printing of a label if an external
printer is connected.
Programming Mode - Used to navigate to the previous specification when programming SPC
codes. Used to move between item codes when reviewing already
programmed item codes. Used to display the current date and time when
programming the date and time.
+ (Plus) key.
Weighing Mode - Used to accumulate data. Also prompts printing of a label if an external
printer is connected.
Programming Mode - Used to navigate to the next specification when programming SPC codes.
Used to move between item codes when reviewing already programmed
item codes. Used to store set point data when programming item codes.
* PRINT key - Print/Data setting key.
Weighing Mode - Used to print a label when an external printer is connected. Used to clear
TOTAL data when doing accumulation.
Programming Mode - Used to temporarily store changes to specification data when programming
SPCs. Used to store data to Item Code memory when programming Item
Codes. Used to store changes to item codes when editing Item Code
information. Used to store the date and time when programming Date and
Time.
SCALE key. Used to select between Scale 1 and Scale 2 if an external scale is
connected.
MODE key - Used to enter the programming mode from the weighing mode. Used to
enter the command mode when using numeric commands.
Key Description
Table 1-4. DC-788 Key Functions