Specifications

Scale Programming 39
delete.
4. Press the CLEAR key to delete all part numbers in memory, or press the MODE key to cancel the
deletion. If you pressed the CLEAR key, the part numbers will be deleted and the scale will return to the
Programming Mode screen.
5. To return to the Weighing Mode, press the MODE key once.
6.8.7 Delete All Setpoint Data in Memory
To clear all the setpoint data associated with Item Codes in memory, perform the following steps.
1. Press MODE key twice to enter the Programming Mode. The scale display will show ProG.
2. Press the REZERO key once. The display will show all 8’s briefly, then return to the Programming
screen.
3. Hold the REZERO key while entering [.] [.] [5] The display will ask you to confirm that you want to
delete.
4. Press the CLEAR key to delete all setpoint data in memory, or press the MODE key to cancel the
deletion. If you pressed the CLEAR key, the setpoint data will be deleted and the scale will return to the
Programming Mode screen.
5. To return to the Weighing Mode, press the MODE key once.
6.8.8 Delete All Part Names in Memory
To clear all the part names associated with Item Codes in memory, perform the following steps.
1. Press MODE key twice to enter the Programming Mode. The scale display will show ProG.
2. Press the REZERO key once. The display will show all 8’s briefly, then return to the Programming
screen.
3. Hold the REZERO key while entering [.] [.] [6] The display will ask you to confirm that you want to