Specifications

36 DC-788 Operation Manual
6.7.1 Change the Lot Number Temporarily
1. In the Weighing Mode, enter a “1” as a command code from the keypad, then press the MODE key.
2. Using the ASCII characters in Table 8-2, enter a Lot Number of up to 32 characters to be used
temporarily.
3. Store the data by pressing the * PRINT key or press the MODE or TARE keys to return to the Weighing
Mode without saving the change.
6.7.2 Change the Part Number Temporarily
1. In the Weighing Mode, enter a “2” as a command code from the keypad, then press the MODE key.
2. Using the ASCII characters in Table 8-2, enter a Part Number of up to 16 characters to be used
temporarily.
3. Store the data by pressing the * PRINT key or press the MODE or TARE keys to return to the Weighing
Mode without saving the change.
6.7.3 Change the Part Name Temporarily
1. In the Weighing Mode, enter a “3” as a command code from the keypad, then press the MODE key.
2. Using the ASCII characters in Table 8-2, enter a Part Name of up to 32 characters to be used temporarily.
3. Store the data by pressing the * PRINT key or press the MODE or TARE keys to return to the Weighing
Mode without saving the change.
6.8 Delete Item Memory
The DC-788 offers you options to delete all items in memory, the values in one field across all items, or
individual fields associated with a specific Item Code.
6.8.1 Delete All Item Codes in Memory
The following procedure describes the steps used to delete ALL information stored within each Item Code (tare
weight, unit weight, inventory quantity, part number, part name, lot number and setpoints).
1. Press MODE key twice to enter the Programming Mode. The scale display will show ProG.
2. Press the REZERO key once. The display will show all 8’s, then return to the Programming display.
3. Hold the REZERO key while entering [.] [.] [0]
4. To delete all item codes in memory, press the CLEAR key. or press the MODE key to exit to the
Programming screen without deleting the item codes. If you pressed the CLEAR key, all the item codes
in memory will be deleted.
5. To exit to the weighing mode without clearing the memory, press the MODE key.
6.8.2 Delete a Specific Item Code
The following procedure describes the steps used to delete a single specific Item Code together will all of its
associated information (tare weight, unit weight, inventory quantity, part number, part name, lot number and set
point).
1. Press MODE key twice to enter the Programming Mode. The scale display will show ProG.
2. Enter the Item Code you wish to delete (the Item Code will appear in the Unit Weight display) and press
the CODE/IN-OUT key. Numeric item codes can be entered from the numeric keypad. To enter an
alphanumeric item code. press the [.] (Decimal) key to enter the ASCII mode. Enter item code number
using the ASCII codes in
Table 8-2.
3. If the Item Code you entered does not exist in memory, the scale simply returns to the Weighing Mode.