Specifications

Configuration Settings 13
SPEC No. Bit 3 Bit 2 Bit 1 Bit 0
00 Auto Power-off Function (for no key operation and weighing operation)
0000: Auto power-off disable when scale is not in use (DEFAULT)
0001: 3 minutes
0010: 10 minutes
0011: 30 minutes
1011: 1 hour
0101: 3 hours
0110 ~ 1111 - not used
(SP1_OFFT)
01 0: Not used
02 Buzzer
0: On (DEFAULT)
1: Off
(SP1_BUZZ)
Error Alarm
0: On (DEFAULT)
1: Off
(SP1_ALARM)
Set Point Alarm
0: On (DEFAULT)
1: Off
(SP1_PALARM)
Not Used
0: (DEFAULT)
03 Unit weight base per
1000PCS or 1 PCS
display
0: 1000PCS (DEFAULT)
1: 1PCS
(SP1_UWID)
Note: When SPEC 27 -
Gross Mode is set to 0:
Allow, the scale remains in
UW/1000, regardless of
how this SPEC 3 is set.
See note under SPEC 27.
Sampling time for unit
weight calculation
0: 10 times
1: 5 times (DEFAULT)
(SP1_STFUWC)
Negative Counting
0: Allow (DEFAULT)
1: Inhibit
(SP1_NCOUNT)
Re-zero Function
0: Allow (DEFAULT)
1: Inhibit
(SP_RZF)
04 Order of month, date and year
00: MM/DD/YY (DEFAULT)
01: DD/MM/YY
10: YY/MM/DD
11: Not used
(SP1_DATEO)
Set Point Type
00: % quantity (DEFAULT)
01: % weight
10: Quantity
11: Weight
(SP1_SPT)
05 Function of RS-232 Interface
00: PC
01: Printer (DEFAULT)
10: Not used
11: Not used
(SP1_RS232IF)
Extrent of insufficient samples
00: 0.1% (DEFAULT)
01: 0.2%
10: 0.0%
11: Not used
(SP1_INSUFFRG)
06 RTS/CTS Handshaking of
RS-232C
0: On
1: Off (DEFAULT)
(SP1_RTS)
Baud Rate of RS-232C
000: 1200 bps 100: 19200 bps
001: 2400 bps 101: Not used
010: 4800 bps 110: Not used
011: 9600 bps (DEFAULT) 111: Not used
(SP1_BAUD)
07 Stop bit of RS-232C
0: 1 bit (DEFAULT)
1: 2 bit
(SP1_STOP)
Data length of RS-232C
0: 7 bit
1: 8 bit (DEFAULT)
(SP1_DLEN)
Parity of RS-232C
00: None (DEFAULT) 10: Even
01: Odd 11: Not used
(SP1_PAR)
Table 3-1. DC-788 (141) Settings