Specifications

Printing Labels (DC-300 only) 91
7.5 Free Format Label Programming
7.5.1 General Label Parameters
Labels with widths of 32 mm to 56 mm and lengths of 19 mm to 111 mm can be programmed. Up to 99 Free
Formats can be defined and stored in memory, with one Item Label and one Total Label under each Free Format
number.
7.5.2 Print Area, Print Position and Print Angles
A 1 mm margin from the edges of the label should be left unprogrammed. Also, the bottom 10 mm of the label is
reserved for fixed data (such as Factory Name, Address and Logo) that do not change as the item data changes.
Figure 7-37. Free Format Label Print Areas Available
The print position of each item on the label is determined by setting the X and Y coordinates of the base position
of the item from a “0” point on the label. The X and Y values can be defined in two types of units: millimeters
and dots. One horizontal dot is equal to 0.135 mm while one vertical dot is equal to 0.155 mm.
Figure 7-38. Free Format Label Print Positions