Specifications

Printing Labels (DC-300 only) 89
button to exit the scale setup dialog box.
4. It is not necessary to use the Scale Preferences tab in the Setup dialog box since the label editor does not
use the RS-232 interface to communicate to the DC-300.
5. Press the
Upload to Scale button to upload the free format label number shown in the label editor program
to the scale.
Figure 7-36. Upload To Scale Screen
6. If you get the message “Upload Free Format: Error on Scale 1”, recheck the scale setup settings from Step 3.
If necessary, check SPEC 42 to make sure that the scale number matches what the program is searching
for.