Specifications

30 DC-200/300 Operation Manual
Note: If you have not yet installed the DC-300 Utility Programs, see “Installing the DC-300 Utility Program”.
Figure 3-4. Load From File Screen
At the opening screen of the Spec Upload program, you have the option to Load the Default Setting file; load
from a named, saved file on your computer; or read the spec settings from the DC-200/300 scale connected to
your computer.
• to load the default specification settings to the scale, click the radio button next to
Load Default Setting.
When you installed the DC-300 Utility Program a file named
Default.ini was copied into the Digisoft
folder on your computer. To see what the default settings are for the scale specifications, see Section 3.1.
• to load a specification file you have previously saved to your computer, select the radio button for
Load
From File
. If the named file you want to upload to the scale appears in the File Name box, click on it to
select it. If the file you want does not appear in the
File Name box, use the Drives and Folders explorer
windows to find the file you are looking for.
Once you have selected the spec configuration file to be uploaded and it appears under
File Name, click on
the
Next button at the bottom of the screen to continue.
5. In the next screen you have the option to change any of the spec settings saved in this file before
uploading.
Figure 3-5. User Specification Screen
To upload to the scale without making any changes, click on the Upload button. To change the setting of
one or more of the first four specs, use the pull down list box for that spec to choose among the available