Specifications

Configuration Settings 27
Figure 3-2. User Specification Screen
6. To change the setting of one or more of the first four specs, use the pull down list box for that spec to
choose among the available settings for that specification. To move to the next four specifications, click
on the
Next button at the bottom of the dialog box.
7. Once you have made all the needed changes to the specifications, you can upload the changed specs to
the scale and also save the new configuration to a named file on your computer for future updating of this
scale or matching the specifications on another DC-200/300 (Section 3.2.2 on page 29).
To save the new configuration settings, click on the
Save button at the bottom of the dialog box. You will
be prompted to give this configuration a file name. The next time you open the DC-300 Spec Upload
program, this file will show as one of the ones available to upload to any DC-200/300. After assigning a
file name, click on the
Save button to save the file. You will be returned to the main Spec Upload Utility
screen.
8. To upload the changed spec settings to the DC-200/300 currently connected to your computer, click on
the
Upload button. The utility will ask you whether you want to update one specific spec or all the specs.
Figure 3-3. Upload Screen
To update only one spec, type its number into the box. To update all the specifications, select the radio
button for
All Specifications. Click on the Upload button.