Specifications

Configuration Settings 19
63 Sample Quantity
Determines the number of pieces the scale assumes are on the platter when you press the PIECES
key to calculate the Unit Weight.
0: 10 pieces (DEFAULT)
1: 25 pieces
2: 50 pieces
3: 100 pieces
64 Scale A <–> B
Sets whether the unit weight determined by sampling on Scale A is automatically transferred to Scale
B or not.
0: Manual (DEFAULT)
1: Auto
65 Unit of Pcs Weight
Sets whether the unit weights are displayed per 1000 pieces or per 1 piece. For a further discussion of
the benefits of each option, please see Section 5.5.
0: 1000 pieces (DEFAULT)
1: 1 piece
66 Not Used
67 IMS
Determines whether or not the scale automatically queries the DIGI Inventory Management Software
(IMS) for all of the parameters associated with an Item Code when the CODE key is pressed. For more
information on this option, please see Section 5.10.1.
0: Disable (DEFAULT)
1: Enable
68 EPSON II
Changes the Epson label format from the default (all item information fields) to an abbreviated format
with only selected fields.
0: Disable (DEFAULT)
1: Enable
69 4 Lot No.
If disabled, allows a single lot number to be entered during weighing operations. If enabled, allows up
to 4 lot numbers to be entered. These lot numbers are not written to the item database.
0: Disable (DEFAULT)
1: Enable
70 Upload Lot and Part Number
If disabled, lot numbers and part numbers entered during weighing operations are not uploaded to the
item database. If enabled, lot numbers and part numbers entered during weighing operations
overwrite the information previously stored with the item code in the scale memory.
0: Disable (DEFAULT)
1: Enable
71 Text 11-16 TTL
Allows you to use text fields 11-16 on total labels rather than just item labels.
0: Disable (DEFAULT)
1: Enable
72 Comma in Quantity
Enabling this option prints a comma after the first three places in a Quantity field on a user
programmed free label format. This allows a large quantity number to be read more easily at a glance.
Does not fit on the standard label format.
0: Disable (DEFAULT)
1: Enable
SPEC Description
Table 3-1. DC-200/300 (141) Settings