Specifications

14 DC-200/300 Operation Manual
SPEC Description
00 Auto Power Saving When No Weight Change & No Key Press
0: Disable (DEFAULT)
1: 1 minute
2: 2 minutes
3: 3 minutes
4: 4 minutes
5: 5 minutes
6: 6 minutes
7: 7 minutes
8: 8 minutes
9: 9 minutes
10: 10 minutes
11: 11 minutes
12: 12 minutes
13: 13 minutes
14: 14 minutes
15: 15 minutes
01 Power Saving Type
When set to 0, the backlight turns off when the scale goes into power-saving mode. When set to 1,
the scale turns off entirely
0: Backlight Off (DEFAULT)
1: Power Off
02 Negative Counting
0: No
1: Yes (DEFAULT)
03 Extent of Insufficient Samples
Sets the percentage of the full scale capacity that the initial counting sample has to exceed, otherwise
the INSUFF lamp lights.
0: 0.1% (DEFAULT)
1: 0.2%
2: 0.0%
04 Set New Item Code During Registration (Operation) Mode
This allows you to add item codes while weighing in the Operation Mode without having to switch to
the programming mode. These item codes can then be saved to the scale’s item code memory (by
choosing 0: Allow - Save); or ou can enter Item Codes, Part Names, and Lot Numbers that will print on
labels but not be saved to the item code memory (1: Allow - Not Save); or not allow items code and
item information to be set unless you are in the programming mode (2: Not Allow).
0: Allow (Save) (DEFAULT)
1: Allow (Not Save)
2: Not Allow
05 Date Order
0: Month/Day/Year (DEFAULT)
1: Day/Month/Year
2: Year/Month/Day
06 Time Format
0: 24 hour (DEFAULT)
1: 12 HOUR (am/pm)
07 Unit Weight Auto Recomputing
0: No (DEFAULT)
1: Yes
08 Sampling Times for Unit Weight Calculation
Higher number samples improve accuracy in environments of higher vibration or breeze but also
increase the time required to compute the unit weight.
0: 15 times (DEFAULT)
1: 20 times
Table 3-1. DC-200/300 (141) Settings