Specifications

12 DC-200/300 Operation Manual
4. Remove the battery slot screw holding in place the battery holder bracket, then remove the bracket.
Figure 2-6. Battery Holder Bracket Location
5. Slide the faston connectors on the battery cables onto the faston tabs on the battery, being careful to
match the wire color with the colored tag by the faston tabs to insure correct polarity.
Figure 2-7. Faston Tabs
6. Place the battery inside the battery compartment. Then replace the battery holder bracket and secure it
with the battery slot screw.
Figure 2-8. Battery Holder Bracket
7. Replace the side cover to the scale case and secure it with the three screws on the bottom of the scale.
Battery Holder
Bracket Location