Specifications

132 DC-200/300 Operation Manual
12.4.1 Header Codes
Data can be input with headers or without them. The following header codes are the ones recognized by the
DC-200/300:
With headers, the bar code data is received as follows:
Without headers, the bar code data is received as follows:
The DC-200/300 also supports the reading of three-line barcodes. the barcodes must have the headers shown in
Table 12-13 above and be in the following format:
To configure the DC-200/300 to recognize barcodes with or without headers, set SPEC 37: BAR CODE
SCANNER (BCS) WITH HEADER to either
0:Enable or 1:Disable.
Note: For instructions on how to set the DC-200/300’s customer specifications, refer to Table 3.1.1.
Header Code ASCII Code Data
1 31 Unit Weight
2 32 Quantity
333ID Code
434Tare Weight
A 41 Gross Weight
E45Lot Number
F 46 Set Point 1 (Weight)
G 47 Setpoint 1 (Quantity)
H48Setpoint 2
I 49 Total Quantity
K4BInventory
M4DPart Number
N4EPart Name
Table 12-13. Barcode Header Codes
Header Data CR (carriage return)
Data CR (carriage return)
Line 1: Space Header Data1 CR (carriage return)
Line 2: Space Data2 CR (carriage return)
Line 3: Data3 CR (carriage return)