Specifications

Network Connection 121
2. Next you will be prompted to restart the scale.
3. Turn the scale off and on again. After the power-up sequence, the DC-200/300 will confirm that it is
ready for data transfer to and from the computer.
4. You can now use the software tools you received on the disc that came with your DC-200/300 scale. For
instructions on how to use the various programs, please see the following sections of this manual.
• to upload and download specification settings for scale, use the Spec Upload program (see
Section 3.2.1).
• to upload and download inventory items as well as text, address, logo and job sequence data, use the
DC-300 Utility program (see Section 6.2).
• to design and upload free label formats, use the DC-300 Label Editor program (see Section 7.3).
11.7 Exiting The Data Transfer Mode on the Scale
When you are done transferring data between the scale and a computer, use the following steps to return the scale
to normal weighing operations.
1. Press
REZERO + SHIFT DOWN. The scale will briefly display a message saying that the Data Transfer
Mode is exiting.
2. Next you will be prompted to restart the scale.
3. Once you have restarted the scale, you will be returned to normal weighing operations.