Specifications

Network Connection 119
4. The Local Connection Status box will appear. Click on the Properties button.
5. The Local Area Connections Properties dialog box will appear. Find the listing for your network
interface card (NIC) in relation to the TCP/IP protocol. (You may have to scroll down to find it.)
Figure 11-3. Select Network Interface Card
6. Once you have selected your NIC card for the TCP/IP protocol, click on the Properties button. This will
open the Properties dialog box.
At the IP Address tab, click the radio button for “Specify an IP address”. Then enter an IP address for
your computer that is different than the scale’s IP address. Enter a Subnet mask of 255.255.255.0. Then
click the
OK button.