Specifications

Reports 107
9.2.2 All Item Print
This option prints all the stored information about each item code stored in memory. To print a report for a single
Item Code, see Section 9.2.1.
1. From the stand-by screen, press the
MODE key once to enter the report mode. The X annunciator will be
illuminated confirming you are in report mode.
2. Press the
* REPRINT key to select 1. ITEM REPORT which is the first available option shown.
3. Press the
+ key to move from option 1.ONE ITEM PRINT to option 2. ALL ITEM PRINT.
4. To start printing the report, press the
* REPRINT key. To stop at any time while the report is printing,
press the
FEED key.
5. To return to the select report screen, press the
PIECES key, followed by the CLEAR key. To return to the
stand-by screen from this point, press the
MODE key 4 times.
Figure 9-2. All Item Report